Beskrivning
AMS Neve 1073SPX-D
The AMS Neve 1073SPX-D seamlessly integrates a complete 1073 channel strip with a robust digital audio interface.
USB and ADAT digital connections transform the 1073SPX-D into a versatile one-stop solution for recording, mixing, and monitoring in any studio, live sound or mobile recording setup.
AMS Neve 1073SPX-D General Specification
- Genuine 1073 transformer-coupled microphone preamplifier / EQ circuit, in a single 1U 19″ rack-mount enclosure
- 2x Balanced Analogue Monitor XLR Line Outputs
- 1x Balanced TRS Headphone Output
- 8x ADAT Digital Inputs & 8x ADAT Digital Outputs via TOSLINK Connection
- Exclusive Neve Marinair transformers used on input and output stages
- USB 2.0 B -Type port for direct connection to Mac or PC
- Class Compliant – Core Audio/ASIO
- Front & rear Mic & Line inputs and front DI input
- Switchable +48v Phantom Power, Hi/Lo impedance, -20dB pad and DI ground lift
- Switchable Phase and EQ in/out
- Pre/Post-EQ insert send/return loop
- 7-stage LED signal level meter – mic/line/DI input-stage level, EQ-stage level or output-stage level up to +24dB
- Output level control -inf>+5dB range
- External multi-voltage PSU with locking 5-pin XLR Connection
- Power – +/116Vdc 2A 230V 20mm & 48Vdc, 250mA 230Vm 20mm
Preamp Specification
- Microphone Input: Gain +80db to +20dB in 5dB steps.
- Line Input: Input impedance 10kΩ, gain +20dB to -10dB in 5dB steps
- DI Input: Input impedance 2M Ohms (PAD off) / 200K Ohms (PAD on) Gain +80dB to +20dB in 5dB steps
EQ Specification
- High Frequency: Smooth +/-16dB fixed frequency shelving at 12kHz
- Low Frequency: Smooth +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz
- Mid Frequency: Smooth +/-18dB peaking, fixed ‘Q’ with selectable centre frequencies of 0.36kHz, 0.7kHz 1.6kHz, 3.2kHz, 4.8kHz & 7.2kHz
- High Pass Filter: 18dB per octave slope, switchable between 50Hz, 80Hz, 160Hz & 300Hz
Audio Performance
- Output: Maximum output is >+26dBu into 600Ω, transformer balanced and earth free. – Output Impedance 75Ω @1kHz
- Distortion: Not more than 0.07% from 50Hz to 10kHz at +20dBu output (80kHz bandwidth) into 600Ω.
- Freq Response: ±0.5dB 20Hz to 20kHz, -3dB at 40kHz. EQ Out.
- Noise: -82dBu at all line gain settings (22Hz to 22kHz bandwidth)
- EIN: Better than -125dBu @ 60dB gain.
Monitor Output Specification
- Maximum output level : +20dBu
Headphone Output Specification: (600 Ohm load)
- Maximum output level : +20dBu
- Frequency Response: 20-20kHz +/- 0.5dB
- Distortion (THD +N): <0.005%
- Noise floor: -90dBu
A/D Specification
- Maximum input level : >+26dBu
- Dynamic Range: 119dB
- Noise (THD +N): <100dBFS
- Distortion: <0.002%
D/A Specification
- Maximum Output level: +26dBu
- Dynamic Range: 117dB
- Noise (THD +N): <91.5dBu
- Distortion: <0.001%
Dimensions
- Width: 480mm (19 inches)
- Height: 44mm (1.75 inches)
- Depth: 360mm (14.7 inches)
- Approx. Weight: 5.475kg (12.07 pounds)
